Quick view Details sku: DAN12035 1955 -1957 Chevy Shift Linkage Bell Crank Bushing MSRP: Now: $2.50 Add to Cart Compare Quick view Details sku: DAN340 1955 Chevy Clutch Bell Housing Bracket with Pivot Stud MSRP: Now: $31.91 Add to Cart Compare Quick view Details sku: DAN1050 1955 Chevy Clutch Cross Shaft MSRP: Now: $40.95 Add to Cart Compare Quick view Details sku: DAN346 1955 Chevy Clutch Frame Bracket with Pivot Stud MSRP: Now: $22.43 Add to Cart Compare Quick view Details sku: DAN350 1955 Chevy Clutch Pivot Stud MSRP: Now: $20.13 Add to Cart Compare Quick view Details sku: DAN348 1955-1956 Chevy Clutch Pedal Return Spring and Hanger Set (Best) MSRP: Now: $37.84 Add to Cart Compare Quick view Details sku: DAN320 1955-1957 Chevy Brake / Clutch Pedal Pad MSRP: Now: $10.64 Add to Cart Compare Quick view Details sku: DAN818 1955-1957 Chevy Brake Or Clutch Pedal Bumper MSRP: Now: $5.87 Add to Cart Compare Quick view Details sku: DAN345 1955-1957 Chevy Clutch Cross Shaft Bushing Kit MSRP: Now: $20.13 Add to Cart Compare Quick view Details sku: DAN891 1955-1957 Chevy Clutch Cross Shaft Felt Washer MSRP: Now: $3.51 Add to Cart Compare Quick view Details sku: DAN342 1955-1957 Chevy Clutch Fork, also 1955-1962 CorVette MSRP: Now: $88.78 Add to Cart Compare Quick view Details sku: DAN352 1955-1957 Chevy Clutch Pedal Shaft Bushing MSRP: Now: $4.66 Add to Cart Compare Quick view sku: DAN12035 1955 -1957 Chevy Shift Linkage Bell Crank Bushing These bell crank bushings install at the mounting/pivot point of the shift linkage bell crank to assure smooth operation. # 12035 will work on any 1955-1957 classic Chevy using a stock shift linkage. Sold as each, 2 required per car. MSRP: Now: $2.50 Add to Cart Compare Quick view sku: DAN340 1955 Chevy Clutch Bell Housing Bracket with Pivot Stud This is the bracket that mounts to the bellhousing which supports the clutch cross shaft or "Z" Bar. Includes the pivot stud. Danchuk # 340 will work on any 1955 classic Chevy. Made in the USA. Note: The 1955 265 V-8 engine... MSRP: Now: $31.91 Add to Cart Compare Quick view sku: DAN1050 1955 Chevy Clutch Cross Shaft Over time the area on the clutch shaft or "Z" bar where it mounts at the pivot studs will wear and allow play. You will notice a marked improvement in clutch movement after replacing your original with one of these perfect reproductions. ... MSRP: Now: $40.95 Add to Cart Compare Quick view sku: DAN346 1955 Chevy Clutch Frame Bracket with Pivot Stud This clutch frame bracket with the pivot stud is made to the exact tolerances of the original for perfect fit and function. Danchuk # 346 will work on any 1955 classic Chevy. Made in the USA. MSRP: Now: $22.43 Add to Cart Compare Quick view sku: DAN350 1955 Chevy Clutch Pivot Stud When replacing your clutch components don't forget to replace this vital part. Danchuk # 350 clutch pivot stud will work on any 1955 classic Chevy. Made in the USA. Two required per car. MSRP: Now: $20.13 Add to Cart Compare Quick view sku: DAN348 1955-1956 Chevy Clutch Pedal Return Spring and Hanger Set (Best) This clutch pedal return spring kit is made with high-quality spring steel, manufactured to duplicate angles and dimensions of the original part. Danchuk # 348 will work on any 1955-1956 classic Chevy with a manual transmission. Made in the... MSRP: Now: $37.84 Add to Cart Compare Quick view sku: DAN320 1955-1957 Chevy Brake / Clutch Pedal Pad This brake/clutch pedal pad is made with the same attention to detail as the original. Grooved for traction and injection molded in long-lasting rubber. Danchuk # 320 will work on any 1955-1957 classic Chevy with standard brakes and... MSRP: Now: $10.64 Add to Cart Compare Quick view sku: DAN818 1955-1957 Chevy Brake Or Clutch Pedal Bumper This is a reproduction of the original for 1955 and 1956 models; its an excellent functional replacement for the 1957. Don't worry about being detected, bumper is hidden from view and will not be noticed. Danchuk # 818 will work on any 1955-1957... MSRP: Now: $5.87 Add to Cart Compare Quick view sku: DAN345 1955-1957 Chevy Clutch Cross Shaft Bushing Kit Everything about our clutch cross shaft bushing is custom. The bolt is turned from raw stock, case-hardened and plated with black oxide to protect it from rust. We've specified a bright plated, corrosion-resistant lock nut that features a nylon insert to... MSRP: Now: $20.13 Add to Cart Compare Quick view sku: DAN891 1955-1957 Chevy Clutch Cross Shaft Felt Washer These are the washers that install at either end of the clutch cross shaft where the shaft meets the mounting tabs. They are designed to keep the lubricating grease for the ball ends clean and inside the shaft where it belongs. Danchuk # 891... MSRP: Now: $3.51 Add to Cart Compare Quick view sku: DAN342 1955-1957 Chevy Clutch Fork, also 1955-1962 CorVette We still run these clutch forks off the original GM Class-A tooling using American steel. You never have to worry about fit or functionality with this Danchuk exclusive quality part. Danchuk # 342 will work on any... MSRP: Now: $88.78 Add to Cart Compare Quick view sku: DAN352 1955-1957 Chevy Clutch Pedal Shaft Bushing The clutch pedal shaft bushing, if worn, will cause your clutch pedal to rock on the shaft and not work properly. Danchuk # 352 will work on any 1955-1957 classic Chevy with a standard transmission. Two bushings per car needed. MSRP: Now: $4.66 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view Details sku: DAN340 1955 Chevy Clutch Bell Housing Bracket with Pivot Stud MSRP: Now: $31.91 Add to Cart Compare Quick view Details sku: DAN1050 1955 Chevy Clutch Cross Shaft MSRP: Now: $40.95 Add to Cart Compare Quick view Details sku: DAN346 1955 Chevy Clutch Frame Bracket with Pivot Stud MSRP: Now: $22.43 Add to Cart Compare Quick view Details sku: DAN350 1955 Chevy Clutch Pivot Stud MSRP: Now: $20.13 Add to Cart Compare Quick view Details sku: DAN348 1955-1956 Chevy Clutch Pedal Return Spring and Hanger Set (Best) MSRP: Now: $37.84 Add to Cart Compare Quick view Details sku: DAN320 1955-1957 Chevy Brake / Clutch Pedal Pad MSRP: Now: $10.64 Add to Cart Compare Quick view Details sku: DAN818 1955-1957 Chevy Brake Or Clutch Pedal Bumper MSRP: Now: $5.87 Add to Cart Compare Quick view Details sku: DAN345 1955-1957 Chevy Clutch Cross Shaft Bushing Kit MSRP: Now: $20.13 Add to Cart Compare Quick view Details sku: DAN891 1955-1957 Chevy Clutch Cross Shaft Felt Washer MSRP: Now: $3.51 Add to Cart Compare Quick view Details sku: DAN342 1955-1957 Chevy Clutch Fork, also 1955-1962 CorVette MSRP: Now: $88.78 Add to Cart Compare Quick view Details sku: DAN352 1955-1957 Chevy Clutch Pedal Shaft Bushing MSRP: Now: $4.66 Add to Cart Compare Quick view sku: DAN12035 1955 -1957 Chevy Shift Linkage Bell Crank Bushing These bell crank bushings install at the mounting/pivot point of the shift linkage bell crank to assure smooth operation. # 12035 will work on any 1955-1957 classic Chevy using a stock shift linkage. Sold as each, 2 required per car. MSRP: Now: $2.50 Add to Cart Compare Quick view sku: DAN340 1955 Chevy Clutch Bell Housing Bracket with Pivot Stud This is the bracket that mounts to the bellhousing which supports the clutch cross shaft or "Z" Bar. Includes the pivot stud. Danchuk # 340 will work on any 1955 classic Chevy. Made in the USA. Note: The 1955 265 V-8 engine... MSRP: Now: $31.91 Add to Cart Compare Quick view sku: DAN1050 1955 Chevy Clutch Cross Shaft Over time the area on the clutch shaft or "Z" bar where it mounts at the pivot studs will wear and allow play. You will notice a marked improvement in clutch movement after replacing your original with one of these perfect reproductions. ... MSRP: Now: $40.95 Add to Cart Compare Quick view sku: DAN346 1955 Chevy Clutch Frame Bracket with Pivot Stud This clutch frame bracket with the pivot stud is made to the exact tolerances of the original for perfect fit and function. Danchuk # 346 will work on any 1955 classic Chevy. Made in the USA. MSRP: Now: $22.43 Add to Cart Compare Quick view sku: DAN350 1955 Chevy Clutch Pivot Stud When replacing your clutch components don't forget to replace this vital part. Danchuk # 350 clutch pivot stud will work on any 1955 classic Chevy. Made in the USA. Two required per car. MSRP: Now: $20.13 Add to Cart Compare Quick view sku: DAN348 1955-1956 Chevy Clutch Pedal Return Spring and Hanger Set (Best) This clutch pedal return spring kit is made with high-quality spring steel, manufactured to duplicate angles and dimensions of the original part. Danchuk # 348 will work on any 1955-1956 classic Chevy with a manual transmission. Made in the... MSRP: Now: $37.84 Add to Cart Compare Quick view sku: DAN320 1955-1957 Chevy Brake / Clutch Pedal Pad This brake/clutch pedal pad is made with the same attention to detail as the original. Grooved for traction and injection molded in long-lasting rubber. Danchuk # 320 will work on any 1955-1957 classic Chevy with standard brakes and... MSRP: Now: $10.64 Add to Cart Compare Quick view sku: DAN818 1955-1957 Chevy Brake Or Clutch Pedal Bumper This is a reproduction of the original for 1955 and 1956 models; its an excellent functional replacement for the 1957. Don't worry about being detected, bumper is hidden from view and will not be noticed. Danchuk # 818 will work on any 1955-1957... MSRP: Now: $5.87 Add to Cart Compare Quick view sku: DAN345 1955-1957 Chevy Clutch Cross Shaft Bushing Kit Everything about our clutch cross shaft bushing is custom. The bolt is turned from raw stock, case-hardened and plated with black oxide to protect it from rust. We've specified a bright plated, corrosion-resistant lock nut that features a nylon insert to... MSRP: Now: $20.13 Add to Cart Compare Quick view sku: DAN891 1955-1957 Chevy Clutch Cross Shaft Felt Washer These are the washers that install at either end of the clutch cross shaft where the shaft meets the mounting tabs. They are designed to keep the lubricating grease for the ball ends clean and inside the shaft where it belongs. Danchuk # 891... MSRP: Now: $3.51 Add to Cart Compare Quick view sku: DAN342 1955-1957 Chevy Clutch Fork, also 1955-1962 CorVette We still run these clutch forks off the original GM Class-A tooling using American steel. You never have to worry about fit or functionality with this Danchuk exclusive quality part. Danchuk # 342 will work on any... MSRP: Now: $88.78 Add to Cart Compare Quick view sku: DAN352 1955-1957 Chevy Clutch Pedal Shaft Bushing The clutch pedal shaft bushing, if worn, will cause your clutch pedal to rock on the shaft and not work properly. Danchuk # 352 will work on any 1955-1957 classic Chevy with a standard transmission. Two bushings per car needed. MSRP: Now: $4.66 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view Details sku: DAN1050 1955 Chevy Clutch Cross Shaft MSRP: Now: $40.95 Add to Cart Compare Quick view Details sku: DAN346 1955 Chevy Clutch Frame Bracket with Pivot Stud MSRP: Now: $22.43 Add to Cart Compare Quick view Details sku: DAN350 1955 Chevy Clutch Pivot Stud MSRP: Now: $20.13 Add to Cart Compare Quick view Details sku: DAN348 1955-1956 Chevy Clutch Pedal Return Spring and Hanger Set (Best) MSRP: Now: $37.84 Add to Cart Compare Quick view Details sku: DAN320 1955-1957 Chevy Brake / Clutch Pedal Pad MSRP: Now: $10.64 Add to Cart Compare Quick view Details sku: DAN818 1955-1957 Chevy Brake Or Clutch Pedal Bumper MSRP: Now: $5.87 Add to Cart Compare Quick view Details sku: DAN345 1955-1957 Chevy Clutch Cross Shaft Bushing Kit MSRP: Now: $20.13 Add to Cart Compare Quick view Details sku: DAN891 1955-1957 Chevy Clutch Cross Shaft Felt Washer MSRP: Now: $3.51 Add to Cart Compare Quick view Details sku: DAN342 1955-1957 Chevy Clutch Fork, also 1955-1962 CorVette MSRP: Now: $88.78 Add to Cart Compare Quick view Details sku: DAN352 1955-1957 Chevy Clutch Pedal Shaft Bushing MSRP: Now: $4.66 Add to Cart Compare Quick view sku: DAN12035 1955 -1957 Chevy Shift Linkage Bell Crank Bushing These bell crank bushings install at the mounting/pivot point of the shift linkage bell crank to assure smooth operation. # 12035 will work on any 1955-1957 classic Chevy using a stock shift linkage. Sold as each, 2 required per car. MSRP: Now: $2.50 Add to Cart Compare Quick view sku: DAN340 1955 Chevy Clutch Bell Housing Bracket with Pivot Stud This is the bracket that mounts to the bellhousing which supports the clutch cross shaft or "Z" Bar. Includes the pivot stud. Danchuk # 340 will work on any 1955 classic Chevy. Made in the USA. Note: The 1955 265 V-8 engine... MSRP: Now: $31.91 Add to Cart Compare Quick view sku: DAN1050 1955 Chevy Clutch Cross Shaft Over time the area on the clutch shaft or "Z" bar where it mounts at the pivot studs will wear and allow play. You will notice a marked improvement in clutch movement after replacing your original with one of these perfect reproductions. ... MSRP: Now: $40.95 Add to Cart Compare Quick view sku: DAN346 1955 Chevy Clutch Frame Bracket with Pivot Stud This clutch frame bracket with the pivot stud is made to the exact tolerances of the original for perfect fit and function. Danchuk # 346 will work on any 1955 classic Chevy. Made in the USA. MSRP: Now: $22.43 Add to Cart Compare Quick view sku: DAN350 1955 Chevy Clutch Pivot Stud When replacing your clutch components don't forget to replace this vital part. Danchuk # 350 clutch pivot stud will work on any 1955 classic Chevy. Made in the USA. Two required per car. MSRP: Now: $20.13 Add to Cart Compare Quick view sku: DAN348 1955-1956 Chevy Clutch Pedal Return Spring and Hanger Set (Best) This clutch pedal return spring kit is made with high-quality spring steel, manufactured to duplicate angles and dimensions of the original part. Danchuk # 348 will work on any 1955-1956 classic Chevy with a manual transmission. Made in the... MSRP: Now: $37.84 Add to Cart Compare Quick view sku: DAN320 1955-1957 Chevy Brake / Clutch Pedal Pad This brake/clutch pedal pad is made with the same attention to detail as the original. Grooved for traction and injection molded in long-lasting rubber. Danchuk # 320 will work on any 1955-1957 classic Chevy with standard brakes and... MSRP: Now: $10.64 Add to Cart Compare Quick view sku: DAN818 1955-1957 Chevy Brake Or Clutch Pedal Bumper This is a reproduction of the original for 1955 and 1956 models; its an excellent functional replacement for the 1957. Don't worry about being detected, bumper is hidden from view and will not be noticed. Danchuk # 818 will work on any 1955-1957... MSRP: Now: $5.87 Add to Cart Compare Quick view sku: DAN345 1955-1957 Chevy Clutch Cross Shaft Bushing Kit Everything about our clutch cross shaft bushing is custom. The bolt is turned from raw stock, case-hardened and plated with black oxide to protect it from rust. We've specified a bright plated, corrosion-resistant lock nut that features a nylon insert to... MSRP: Now: $20.13 Add to Cart Compare Quick view sku: DAN891 1955-1957 Chevy Clutch Cross Shaft Felt Washer These are the washers that install at either end of the clutch cross shaft where the shaft meets the mounting tabs. They are designed to keep the lubricating grease for the ball ends clean and inside the shaft where it belongs. Danchuk # 891... MSRP: Now: $3.51 Add to Cart Compare Quick view sku: DAN342 1955-1957 Chevy Clutch Fork, also 1955-1962 CorVette We still run these clutch forks off the original GM Class-A tooling using American steel. You never have to worry about fit or functionality with this Danchuk exclusive quality part. Danchuk # 342 will work on any... MSRP: Now: $88.78 Add to Cart Compare Quick view sku: DAN352 1955-1957 Chevy Clutch Pedal Shaft Bushing The clutch pedal shaft bushing, if worn, will cause your clutch pedal to rock on the shaft and not work properly. Danchuk # 352 will work on any 1955-1957 classic Chevy with a standard transmission. Two bushings per car needed. MSRP: Now: $4.66 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view Details sku: DAN346 1955 Chevy Clutch Frame Bracket with Pivot Stud MSRP: Now: $22.43 Add to Cart Compare Quick view Details sku: DAN350 1955 Chevy Clutch Pivot Stud MSRP: Now: $20.13 Add to Cart Compare Quick view Details sku: DAN348 1955-1956 Chevy Clutch Pedal Return Spring and Hanger Set (Best) MSRP: Now: $37.84 Add to Cart Compare Quick view Details sku: DAN320 1955-1957 Chevy Brake / Clutch Pedal Pad MSRP: Now: $10.64 Add to Cart Compare Quick view Details sku: DAN818 1955-1957 Chevy Brake Or Clutch Pedal Bumper MSRP: Now: $5.87 Add to Cart Compare Quick view Details sku: DAN345 1955-1957 Chevy Clutch Cross Shaft Bushing Kit MSRP: Now: $20.13 Add to Cart Compare Quick view Details sku: DAN891 1955-1957 Chevy Clutch Cross Shaft Felt Washer MSRP: Now: $3.51 Add to Cart Compare Quick view Details sku: DAN342 1955-1957 Chevy Clutch Fork, also 1955-1962 CorVette MSRP: Now: $88.78 Add to Cart Compare Quick view Details sku: DAN352 1955-1957 Chevy Clutch Pedal Shaft Bushing MSRP: Now: $4.66 Add to Cart Compare Quick view sku: DAN12035 1955 -1957 Chevy Shift Linkage Bell Crank Bushing These bell crank bushings install at the mounting/pivot point of the shift linkage bell crank to assure smooth operation. # 12035 will work on any 1955-1957 classic Chevy using a stock shift linkage. Sold as each, 2 required per car. MSRP: Now: $2.50 Add to Cart Compare Quick view sku: DAN340 1955 Chevy Clutch Bell Housing Bracket with Pivot Stud This is the bracket that mounts to the bellhousing which supports the clutch cross shaft or "Z" Bar. Includes the pivot stud. Danchuk # 340 will work on any 1955 classic Chevy. Made in the USA. Note: The 1955 265 V-8 engine... MSRP: Now: $31.91 Add to Cart Compare Quick view sku: DAN1050 1955 Chevy Clutch Cross Shaft Over time the area on the clutch shaft or "Z" bar where it mounts at the pivot studs will wear and allow play. You will notice a marked improvement in clutch movement after replacing your original with one of these perfect reproductions. ... MSRP: Now: $40.95 Add to Cart Compare Quick view sku: DAN346 1955 Chevy Clutch Frame Bracket with Pivot Stud This clutch frame bracket with the pivot stud is made to the exact tolerances of the original for perfect fit and function. Danchuk # 346 will work on any 1955 classic Chevy. Made in the USA. MSRP: Now: $22.43 Add to Cart Compare Quick view sku: DAN350 1955 Chevy Clutch Pivot Stud When replacing your clutch components don't forget to replace this vital part. Danchuk # 350 clutch pivot stud will work on any 1955 classic Chevy. Made in the USA. Two required per car. MSRP: Now: $20.13 Add to Cart Compare Quick view sku: DAN348 1955-1956 Chevy Clutch Pedal Return Spring and Hanger Set (Best) This clutch pedal return spring kit is made with high-quality spring steel, manufactured to duplicate angles and dimensions of the original part. Danchuk # 348 will work on any 1955-1956 classic Chevy with a manual transmission. Made in the... MSRP: Now: $37.84 Add to Cart Compare Quick view sku: DAN320 1955-1957 Chevy Brake / Clutch Pedal Pad This brake/clutch pedal pad is made with the same attention to detail as the original. Grooved for traction and injection molded in long-lasting rubber. Danchuk # 320 will work on any 1955-1957 classic Chevy with standard brakes and... MSRP: Now: $10.64 Add to Cart Compare Quick view sku: DAN818 1955-1957 Chevy Brake Or Clutch Pedal Bumper This is a reproduction of the original for 1955 and 1956 models; its an excellent functional replacement for the 1957. Don't worry about being detected, bumper is hidden from view and will not be noticed. Danchuk # 818 will work on any 1955-1957... MSRP: Now: $5.87 Add to Cart Compare Quick view sku: DAN345 1955-1957 Chevy Clutch Cross Shaft Bushing Kit Everything about our clutch cross shaft bushing is custom. The bolt is turned from raw stock, case-hardened and plated with black oxide to protect it from rust. We've specified a bright plated, corrosion-resistant lock nut that features a nylon insert to... MSRP: Now: $20.13 Add to Cart Compare Quick view sku: DAN891 1955-1957 Chevy Clutch Cross Shaft Felt Washer These are the washers that install at either end of the clutch cross shaft where the shaft meets the mounting tabs. They are designed to keep the lubricating grease for the ball ends clean and inside the shaft where it belongs. Danchuk # 891... MSRP: Now: $3.51 Add to Cart Compare Quick view sku: DAN342 1955-1957 Chevy Clutch Fork, also 1955-1962 CorVette We still run these clutch forks off the original GM Class-A tooling using American steel. You never have to worry about fit or functionality with this Danchuk exclusive quality part. Danchuk # 342 will work on any... MSRP: Now: $88.78 Add to Cart Compare Quick view sku: DAN352 1955-1957 Chevy Clutch Pedal Shaft Bushing The clutch pedal shaft bushing, if worn, will cause your clutch pedal to rock on the shaft and not work properly. Danchuk # 352 will work on any 1955-1957 classic Chevy with a standard transmission. Two bushings per car needed. MSRP: Now: $4.66 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view Details sku: DAN350 1955 Chevy Clutch Pivot Stud MSRP: Now: $20.13 Add to Cart Compare Quick view Details sku: DAN348 1955-1956 Chevy Clutch Pedal Return Spring and Hanger Set (Best) MSRP: Now: $37.84 Add to Cart Compare Quick view Details sku: DAN320 1955-1957 Chevy Brake / Clutch Pedal Pad MSRP: Now: $10.64 Add to Cart Compare Quick view Details sku: DAN818 1955-1957 Chevy Brake Or Clutch Pedal Bumper MSRP: Now: $5.87 Add to Cart Compare Quick view Details sku: DAN345 1955-1957 Chevy Clutch Cross Shaft Bushing Kit MSRP: Now: $20.13 Add to Cart Compare Quick view Details sku: DAN891 1955-1957 Chevy Clutch Cross Shaft Felt Washer MSRP: Now: $3.51 Add to Cart Compare Quick view Details sku: DAN342 1955-1957 Chevy Clutch Fork, also 1955-1962 CorVette MSRP: Now: $88.78 Add to Cart Compare Quick view Details sku: DAN352 1955-1957 Chevy Clutch Pedal Shaft Bushing MSRP: Now: $4.66 Add to Cart Compare Quick view sku: DAN12035 1955 -1957 Chevy Shift Linkage Bell Crank Bushing These bell crank bushings install at the mounting/pivot point of the shift linkage bell crank to assure smooth operation. # 12035 will work on any 1955-1957 classic Chevy using a stock shift linkage. Sold as each, 2 required per car. MSRP: Now: $2.50 Add to Cart Compare Quick view sku: DAN340 1955 Chevy Clutch Bell Housing Bracket with Pivot Stud This is the bracket that mounts to the bellhousing which supports the clutch cross shaft or "Z" Bar. Includes the pivot stud. Danchuk # 340 will work on any 1955 classic Chevy. Made in the USA. Note: The 1955 265 V-8 engine... MSRP: Now: $31.91 Add to Cart Compare Quick view sku: DAN1050 1955 Chevy Clutch Cross Shaft Over time the area on the clutch shaft or "Z" bar where it mounts at the pivot studs will wear and allow play. You will notice a marked improvement in clutch movement after replacing your original with one of these perfect reproductions. ... MSRP: Now: $40.95 Add to Cart Compare Quick view sku: DAN346 1955 Chevy Clutch Frame Bracket with Pivot Stud This clutch frame bracket with the pivot stud is made to the exact tolerances of the original for perfect fit and function. Danchuk # 346 will work on any 1955 classic Chevy. Made in the USA. MSRP: Now: $22.43 Add to Cart Compare Quick view sku: DAN350 1955 Chevy Clutch Pivot Stud When replacing your clutch components don't forget to replace this vital part. Danchuk # 350 clutch pivot stud will work on any 1955 classic Chevy. Made in the USA. Two required per car. MSRP: Now: $20.13 Add to Cart Compare Quick view sku: DAN348 1955-1956 Chevy Clutch Pedal Return Spring and Hanger Set (Best) This clutch pedal return spring kit is made with high-quality spring steel, manufactured to duplicate angles and dimensions of the original part. Danchuk # 348 will work on any 1955-1956 classic Chevy with a manual transmission. Made in the... MSRP: Now: $37.84 Add to Cart Compare Quick view sku: DAN320 1955-1957 Chevy Brake / Clutch Pedal Pad This brake/clutch pedal pad is made with the same attention to detail as the original. Grooved for traction and injection molded in long-lasting rubber. Danchuk # 320 will work on any 1955-1957 classic Chevy with standard brakes and... MSRP: Now: $10.64 Add to Cart Compare Quick view sku: DAN818 1955-1957 Chevy Brake Or Clutch Pedal Bumper This is a reproduction of the original for 1955 and 1956 models; its an excellent functional replacement for the 1957. Don't worry about being detected, bumper is hidden from view and will not be noticed. Danchuk # 818 will work on any 1955-1957... MSRP: Now: $5.87 Add to Cart Compare Quick view sku: DAN345 1955-1957 Chevy Clutch Cross Shaft Bushing Kit Everything about our clutch cross shaft bushing is custom. The bolt is turned from raw stock, case-hardened and plated with black oxide to protect it from rust. We've specified a bright plated, corrosion-resistant lock nut that features a nylon insert to... MSRP: Now: $20.13 Add to Cart Compare Quick view sku: DAN891 1955-1957 Chevy Clutch Cross Shaft Felt Washer These are the washers that install at either end of the clutch cross shaft where the shaft meets the mounting tabs. They are designed to keep the lubricating grease for the ball ends clean and inside the shaft where it belongs. Danchuk # 891... MSRP: Now: $3.51 Add to Cart Compare Quick view sku: DAN342 1955-1957 Chevy Clutch Fork, also 1955-1962 CorVette We still run these clutch forks off the original GM Class-A tooling using American steel. You never have to worry about fit or functionality with this Danchuk exclusive quality part. Danchuk # 342 will work on any... MSRP: Now: $88.78 Add to Cart Compare Quick view sku: DAN352 1955-1957 Chevy Clutch Pedal Shaft Bushing The clutch pedal shaft bushing, if worn, will cause your clutch pedal to rock on the shaft and not work properly. Danchuk # 352 will work on any 1955-1957 classic Chevy with a standard transmission. Two bushings per car needed. MSRP: Now: $4.66 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view Details sku: DAN348 1955-1956 Chevy Clutch Pedal Return Spring and Hanger Set (Best) MSRP: Now: $37.84 Add to Cart Compare Quick view Details sku: DAN320 1955-1957 Chevy Brake / Clutch Pedal Pad MSRP: Now: $10.64 Add to Cart Compare Quick view Details sku: DAN818 1955-1957 Chevy Brake Or Clutch Pedal Bumper MSRP: Now: $5.87 Add to Cart Compare Quick view Details sku: DAN345 1955-1957 Chevy Clutch Cross Shaft Bushing Kit MSRP: Now: $20.13 Add to Cart Compare Quick view Details sku: DAN891 1955-1957 Chevy Clutch Cross Shaft Felt Washer MSRP: Now: $3.51 Add to Cart Compare Quick view Details sku: DAN342 1955-1957 Chevy Clutch Fork, also 1955-1962 CorVette MSRP: Now: $88.78 Add to Cart Compare Quick view Details sku: DAN352 1955-1957 Chevy Clutch Pedal Shaft Bushing MSRP: Now: $4.66 Add to Cart Compare Quick view sku: DAN12035 1955 -1957 Chevy Shift Linkage Bell Crank Bushing These bell crank bushings install at the mounting/pivot point of the shift linkage bell crank to assure smooth operation. # 12035 will work on any 1955-1957 classic Chevy using a stock shift linkage. Sold as each, 2 required per car. MSRP: Now: $2.50 Add to Cart Compare Quick view sku: DAN340 1955 Chevy Clutch Bell Housing Bracket with Pivot Stud This is the bracket that mounts to the bellhousing which supports the clutch cross shaft or "Z" Bar. Includes the pivot stud. Danchuk # 340 will work on any 1955 classic Chevy. Made in the USA. Note: The 1955 265 V-8 engine... MSRP: Now: $31.91 Add to Cart Compare Quick view sku: DAN1050 1955 Chevy Clutch Cross Shaft Over time the area on the clutch shaft or "Z" bar where it mounts at the pivot studs will wear and allow play. You will notice a marked improvement in clutch movement after replacing your original with one of these perfect reproductions. ... MSRP: Now: $40.95 Add to Cart Compare Quick view sku: DAN346 1955 Chevy Clutch Frame Bracket with Pivot Stud This clutch frame bracket with the pivot stud is made to the exact tolerances of the original for perfect fit and function. Danchuk # 346 will work on any 1955 classic Chevy. Made in the USA. MSRP: Now: $22.43 Add to Cart Compare Quick view sku: DAN350 1955 Chevy Clutch Pivot Stud When replacing your clutch components don't forget to replace this vital part. Danchuk # 350 clutch pivot stud will work on any 1955 classic Chevy. Made in the USA. Two required per car. MSRP: Now: $20.13 Add to Cart Compare Quick view sku: DAN348 1955-1956 Chevy Clutch Pedal Return Spring and Hanger Set (Best) This clutch pedal return spring kit is made with high-quality spring steel, manufactured to duplicate angles and dimensions of the original part. Danchuk # 348 will work on any 1955-1956 classic Chevy with a manual transmission. Made in the... MSRP: Now: $37.84 Add to Cart Compare Quick view sku: DAN320 1955-1957 Chevy Brake / Clutch Pedal Pad This brake/clutch pedal pad is made with the same attention to detail as the original. Grooved for traction and injection molded in long-lasting rubber. Danchuk # 320 will work on any 1955-1957 classic Chevy with standard brakes and... MSRP: Now: $10.64 Add to Cart Compare Quick view sku: DAN818 1955-1957 Chevy Brake Or Clutch Pedal Bumper This is a reproduction of the original for 1955 and 1956 models; its an excellent functional replacement for the 1957. Don't worry about being detected, bumper is hidden from view and will not be noticed. Danchuk # 818 will work on any 1955-1957... MSRP: Now: $5.87 Add to Cart Compare Quick view sku: DAN345 1955-1957 Chevy Clutch Cross Shaft Bushing Kit Everything about our clutch cross shaft bushing is custom. The bolt is turned from raw stock, case-hardened and plated with black oxide to protect it from rust. We've specified a bright plated, corrosion-resistant lock nut that features a nylon insert to... MSRP: Now: $20.13 Add to Cart Compare Quick view sku: DAN891 1955-1957 Chevy Clutch Cross Shaft Felt Washer These are the washers that install at either end of the clutch cross shaft where the shaft meets the mounting tabs. They are designed to keep the lubricating grease for the ball ends clean and inside the shaft where it belongs. Danchuk # 891... MSRP: Now: $3.51 Add to Cart Compare Quick view sku: DAN342 1955-1957 Chevy Clutch Fork, also 1955-1962 CorVette We still run these clutch forks off the original GM Class-A tooling using American steel. You never have to worry about fit or functionality with this Danchuk exclusive quality part. Danchuk # 342 will work on any... MSRP: Now: $88.78 Add to Cart Compare Quick view sku: DAN352 1955-1957 Chevy Clutch Pedal Shaft Bushing The clutch pedal shaft bushing, if worn, will cause your clutch pedal to rock on the shaft and not work properly. Danchuk # 352 will work on any 1955-1957 classic Chevy with a standard transmission. Two bushings per car needed. MSRP: Now: $4.66 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view Details sku: DAN320 1955-1957 Chevy Brake / Clutch Pedal Pad MSRP: Now: $10.64 Add to Cart Compare Quick view Details sku: DAN818 1955-1957 Chevy Brake Or Clutch Pedal Bumper MSRP: Now: $5.87 Add to Cart Compare Quick view Details sku: DAN345 1955-1957 Chevy Clutch Cross Shaft Bushing Kit MSRP: Now: $20.13 Add to Cart Compare Quick view Details sku: DAN891 1955-1957 Chevy Clutch Cross Shaft Felt Washer MSRP: Now: $3.51 Add to Cart Compare Quick view Details sku: DAN342 1955-1957 Chevy Clutch Fork, also 1955-1962 CorVette MSRP: Now: $88.78 Add to Cart Compare Quick view Details sku: DAN352 1955-1957 Chevy Clutch Pedal Shaft Bushing MSRP: Now: $4.66 Add to Cart Compare Quick view sku: DAN12035 1955 -1957 Chevy Shift Linkage Bell Crank Bushing These bell crank bushings install at the mounting/pivot point of the shift linkage bell crank to assure smooth operation. # 12035 will work on any 1955-1957 classic Chevy using a stock shift linkage. Sold as each, 2 required per car. MSRP: Now: $2.50 Add to Cart Compare Quick view sku: DAN340 1955 Chevy Clutch Bell Housing Bracket with Pivot Stud This is the bracket that mounts to the bellhousing which supports the clutch cross shaft or "Z" Bar. Includes the pivot stud. Danchuk # 340 will work on any 1955 classic Chevy. Made in the USA. Note: The 1955 265 V-8 engine... MSRP: Now: $31.91 Add to Cart Compare Quick view sku: DAN1050 1955 Chevy Clutch Cross Shaft Over time the area on the clutch shaft or "Z" bar where it mounts at the pivot studs will wear and allow play. You will notice a marked improvement in clutch movement after replacing your original with one of these perfect reproductions. ... MSRP: Now: $40.95 Add to Cart Compare Quick view sku: DAN346 1955 Chevy Clutch Frame Bracket with Pivot Stud This clutch frame bracket with the pivot stud is made to the exact tolerances of the original for perfect fit and function. Danchuk # 346 will work on any 1955 classic Chevy. Made in the USA. MSRP: Now: $22.43 Add to Cart Compare Quick view sku: DAN350 1955 Chevy Clutch Pivot Stud When replacing your clutch components don't forget to replace this vital part. Danchuk # 350 clutch pivot stud will work on any 1955 classic Chevy. Made in the USA. Two required per car. MSRP: Now: $20.13 Add to Cart Compare Quick view sku: DAN348 1955-1956 Chevy Clutch Pedal Return Spring and Hanger Set (Best) This clutch pedal return spring kit is made with high-quality spring steel, manufactured to duplicate angles and dimensions of the original part. Danchuk # 348 will work on any 1955-1956 classic Chevy with a manual transmission. Made in the... MSRP: Now: $37.84 Add to Cart Compare Quick view sku: DAN320 1955-1957 Chevy Brake / Clutch Pedal Pad This brake/clutch pedal pad is made with the same attention to detail as the original. Grooved for traction and injection molded in long-lasting rubber. Danchuk # 320 will work on any 1955-1957 classic Chevy with standard brakes and... MSRP: Now: $10.64 Add to Cart Compare Quick view sku: DAN818 1955-1957 Chevy Brake Or Clutch Pedal Bumper This is a reproduction of the original for 1955 and 1956 models; its an excellent functional replacement for the 1957. Don't worry about being detected, bumper is hidden from view and will not be noticed. Danchuk # 818 will work on any 1955-1957... MSRP: Now: $5.87 Add to Cart Compare Quick view sku: DAN345 1955-1957 Chevy Clutch Cross Shaft Bushing Kit Everything about our clutch cross shaft bushing is custom. The bolt is turned from raw stock, case-hardened and plated with black oxide to protect it from rust. We've specified a bright plated, corrosion-resistant lock nut that features a nylon insert to... MSRP: Now: $20.13 Add to Cart Compare Quick view sku: DAN891 1955-1957 Chevy Clutch Cross Shaft Felt Washer These are the washers that install at either end of the clutch cross shaft where the shaft meets the mounting tabs. They are designed to keep the lubricating grease for the ball ends clean and inside the shaft where it belongs. Danchuk # 891... MSRP: Now: $3.51 Add to Cart Compare Quick view sku: DAN342 1955-1957 Chevy Clutch Fork, also 1955-1962 CorVette We still run these clutch forks off the original GM Class-A tooling using American steel. You never have to worry about fit or functionality with this Danchuk exclusive quality part. Danchuk # 342 will work on any... MSRP: Now: $88.78 Add to Cart Compare Quick view sku: DAN352 1955-1957 Chevy Clutch Pedal Shaft Bushing The clutch pedal shaft bushing, if worn, will cause your clutch pedal to rock on the shaft and not work properly. Danchuk # 352 will work on any 1955-1957 classic Chevy with a standard transmission. Two bushings per car needed. MSRP: Now: $4.66 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view Details sku: DAN818 1955-1957 Chevy Brake Or Clutch Pedal Bumper MSRP: Now: $5.87 Add to Cart Compare Quick view Details sku: DAN345 1955-1957 Chevy Clutch Cross Shaft Bushing Kit MSRP: Now: $20.13 Add to Cart Compare Quick view Details sku: DAN891 1955-1957 Chevy Clutch Cross Shaft Felt Washer MSRP: Now: $3.51 Add to Cart Compare Quick view Details sku: DAN342 1955-1957 Chevy Clutch Fork, also 1955-1962 CorVette MSRP: Now: $88.78 Add to Cart Compare Quick view Details sku: DAN352 1955-1957 Chevy Clutch Pedal Shaft Bushing MSRP: Now: $4.66 Add to Cart Compare Quick view sku: DAN12035 1955 -1957 Chevy Shift Linkage Bell Crank Bushing These bell crank bushings install at the mounting/pivot point of the shift linkage bell crank to assure smooth operation. # 12035 will work on any 1955-1957 classic Chevy using a stock shift linkage. Sold as each, 2 required per car. MSRP: Now: $2.50 Add to Cart Compare Quick view sku: DAN340 1955 Chevy Clutch Bell Housing Bracket with Pivot Stud This is the bracket that mounts to the bellhousing which supports the clutch cross shaft or "Z" Bar. Includes the pivot stud. Danchuk # 340 will work on any 1955 classic Chevy. Made in the USA. Note: The 1955 265 V-8 engine... MSRP: Now: $31.91 Add to Cart Compare Quick view sku: DAN1050 1955 Chevy Clutch Cross Shaft Over time the area on the clutch shaft or "Z" bar where it mounts at the pivot studs will wear and allow play. You will notice a marked improvement in clutch movement after replacing your original with one of these perfect reproductions. ... MSRP: Now: $40.95 Add to Cart Compare Quick view sku: DAN346 1955 Chevy Clutch Frame Bracket with Pivot Stud This clutch frame bracket with the pivot stud is made to the exact tolerances of the original for perfect fit and function. Danchuk # 346 will work on any 1955 classic Chevy. Made in the USA. MSRP: Now: $22.43 Add to Cart Compare Quick view sku: DAN350 1955 Chevy Clutch Pivot Stud When replacing your clutch components don't forget to replace this vital part. Danchuk # 350 clutch pivot stud will work on any 1955 classic Chevy. Made in the USA. Two required per car. MSRP: Now: $20.13 Add to Cart Compare Quick view sku: DAN348 1955-1956 Chevy Clutch Pedal Return Spring and Hanger Set (Best) This clutch pedal return spring kit is made with high-quality spring steel, manufactured to duplicate angles and dimensions of the original part. Danchuk # 348 will work on any 1955-1956 classic Chevy with a manual transmission. Made in the... MSRP: Now: $37.84 Add to Cart Compare Quick view sku: DAN320 1955-1957 Chevy Brake / Clutch Pedal Pad This brake/clutch pedal pad is made with the same attention to detail as the original. Grooved for traction and injection molded in long-lasting rubber. Danchuk # 320 will work on any 1955-1957 classic Chevy with standard brakes and... MSRP: Now: $10.64 Add to Cart Compare Quick view sku: DAN818 1955-1957 Chevy Brake Or Clutch Pedal Bumper This is a reproduction of the original for 1955 and 1956 models; its an excellent functional replacement for the 1957. Don't worry about being detected, bumper is hidden from view and will not be noticed. Danchuk # 818 will work on any 1955-1957... MSRP: Now: $5.87 Add to Cart Compare Quick view sku: DAN345 1955-1957 Chevy Clutch Cross Shaft Bushing Kit Everything about our clutch cross shaft bushing is custom. The bolt is turned from raw stock, case-hardened and plated with black oxide to protect it from rust. We've specified a bright plated, corrosion-resistant lock nut that features a nylon insert to... MSRP: Now: $20.13 Add to Cart Compare Quick view sku: DAN891 1955-1957 Chevy Clutch Cross Shaft Felt Washer These are the washers that install at either end of the clutch cross shaft where the shaft meets the mounting tabs. They are designed to keep the lubricating grease for the ball ends clean and inside the shaft where it belongs. Danchuk # 891... MSRP: Now: $3.51 Add to Cart Compare Quick view sku: DAN342 1955-1957 Chevy Clutch Fork, also 1955-1962 CorVette We still run these clutch forks off the original GM Class-A tooling using American steel. You never have to worry about fit or functionality with this Danchuk exclusive quality part. Danchuk # 342 will work on any... MSRP: Now: $88.78 Add to Cart Compare Quick view sku: DAN352 1955-1957 Chevy Clutch Pedal Shaft Bushing The clutch pedal shaft bushing, if worn, will cause your clutch pedal to rock on the shaft and not work properly. Danchuk # 352 will work on any 1955-1957 classic Chevy with a standard transmission. Two bushings per car needed. MSRP: Now: $4.66 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view Details sku: DAN345 1955-1957 Chevy Clutch Cross Shaft Bushing Kit MSRP: Now: $20.13 Add to Cart Compare Quick view Details sku: DAN891 1955-1957 Chevy Clutch Cross Shaft Felt Washer MSRP: Now: $3.51 Add to Cart Compare Quick view Details sku: DAN342 1955-1957 Chevy Clutch Fork, also 1955-1962 CorVette MSRP: Now: $88.78 Add to Cart Compare Quick view Details sku: DAN352 1955-1957 Chevy Clutch Pedal Shaft Bushing MSRP: Now: $4.66 Add to Cart Compare Quick view sku: DAN12035 1955 -1957 Chevy Shift Linkage Bell Crank Bushing These bell crank bushings install at the mounting/pivot point of the shift linkage bell crank to assure smooth operation. # 12035 will work on any 1955-1957 classic Chevy using a stock shift linkage. Sold as each, 2 required per car. MSRP: Now: $2.50 Add to Cart Compare Quick view sku: DAN340 1955 Chevy Clutch Bell Housing Bracket with Pivot Stud This is the bracket that mounts to the bellhousing which supports the clutch cross shaft or "Z" Bar. Includes the pivot stud. Danchuk # 340 will work on any 1955 classic Chevy. Made in the USA. Note: The 1955 265 V-8 engine... MSRP: Now: $31.91 Add to Cart Compare Quick view sku: DAN1050 1955 Chevy Clutch Cross Shaft Over time the area on the clutch shaft or "Z" bar where it mounts at the pivot studs will wear and allow play. You will notice a marked improvement in clutch movement after replacing your original with one of these perfect reproductions. ... MSRP: Now: $40.95 Add to Cart Compare Quick view sku: DAN346 1955 Chevy Clutch Frame Bracket with Pivot Stud This clutch frame bracket with the pivot stud is made to the exact tolerances of the original for perfect fit and function. Danchuk # 346 will work on any 1955 classic Chevy. Made in the USA. MSRP: Now: $22.43 Add to Cart Compare Quick view sku: DAN350 1955 Chevy Clutch Pivot Stud When replacing your clutch components don't forget to replace this vital part. Danchuk # 350 clutch pivot stud will work on any 1955 classic Chevy. Made in the USA. Two required per car. MSRP: Now: $20.13 Add to Cart Compare Quick view sku: DAN348 1955-1956 Chevy Clutch Pedal Return Spring and Hanger Set (Best) This clutch pedal return spring kit is made with high-quality spring steel, manufactured to duplicate angles and dimensions of the original part. Danchuk # 348 will work on any 1955-1956 classic Chevy with a manual transmission. Made in the... MSRP: Now: $37.84 Add to Cart Compare Quick view sku: DAN320 1955-1957 Chevy Brake / Clutch Pedal Pad This brake/clutch pedal pad is made with the same attention to detail as the original. Grooved for traction and injection molded in long-lasting rubber. Danchuk # 320 will work on any 1955-1957 classic Chevy with standard brakes and... MSRP: Now: $10.64 Add to Cart Compare Quick view sku: DAN818 1955-1957 Chevy Brake Or Clutch Pedal Bumper This is a reproduction of the original for 1955 and 1956 models; its an excellent functional replacement for the 1957. Don't worry about being detected, bumper is hidden from view and will not be noticed. Danchuk # 818 will work on any 1955-1957... MSRP: Now: $5.87 Add to Cart Compare Quick view sku: DAN345 1955-1957 Chevy Clutch Cross Shaft Bushing Kit Everything about our clutch cross shaft bushing is custom. The bolt is turned from raw stock, case-hardened and plated with black oxide to protect it from rust. We've specified a bright plated, corrosion-resistant lock nut that features a nylon insert to... MSRP: Now: $20.13 Add to Cart Compare Quick view sku: DAN891 1955-1957 Chevy Clutch Cross Shaft Felt Washer These are the washers that install at either end of the clutch cross shaft where the shaft meets the mounting tabs. They are designed to keep the lubricating grease for the ball ends clean and inside the shaft where it belongs. Danchuk # 891... MSRP: Now: $3.51 Add to Cart Compare Quick view sku: DAN342 1955-1957 Chevy Clutch Fork, also 1955-1962 CorVette We still run these clutch forks off the original GM Class-A tooling using American steel. You never have to worry about fit or functionality with this Danchuk exclusive quality part. Danchuk # 342 will work on any... MSRP: Now: $88.78 Add to Cart Compare Quick view sku: DAN352 1955-1957 Chevy Clutch Pedal Shaft Bushing The clutch pedal shaft bushing, if worn, will cause your clutch pedal to rock on the shaft and not work properly. Danchuk # 352 will work on any 1955-1957 classic Chevy with a standard transmission. Two bushings per car needed. MSRP: Now: $4.66 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view Details sku: DAN891 1955-1957 Chevy Clutch Cross Shaft Felt Washer MSRP: Now: $3.51 Add to Cart Compare Quick view Details sku: DAN342 1955-1957 Chevy Clutch Fork, also 1955-1962 CorVette MSRP: Now: $88.78 Add to Cart Compare Quick view Details sku: DAN352 1955-1957 Chevy Clutch Pedal Shaft Bushing MSRP: Now: $4.66 Add to Cart Compare Quick view sku: DAN12035 1955 -1957 Chevy Shift Linkage Bell Crank Bushing These bell crank bushings install at the mounting/pivot point of the shift linkage bell crank to assure smooth operation. # 12035 will work on any 1955-1957 classic Chevy using a stock shift linkage. Sold as each, 2 required per car. MSRP: Now: $2.50 Add to Cart Compare Quick view sku: DAN340 1955 Chevy Clutch Bell Housing Bracket with Pivot Stud This is the bracket that mounts to the bellhousing which supports the clutch cross shaft or "Z" Bar. Includes the pivot stud. Danchuk # 340 will work on any 1955 classic Chevy. Made in the USA. Note: The 1955 265 V-8 engine... MSRP: Now: $31.91 Add to Cart Compare Quick view sku: DAN1050 1955 Chevy Clutch Cross Shaft Over time the area on the clutch shaft or "Z" bar where it mounts at the pivot studs will wear and allow play. You will notice a marked improvement in clutch movement after replacing your original with one of these perfect reproductions. ... MSRP: Now: $40.95 Add to Cart Compare Quick view sku: DAN346 1955 Chevy Clutch Frame Bracket with Pivot Stud This clutch frame bracket with the pivot stud is made to the exact tolerances of the original for perfect fit and function. Danchuk # 346 will work on any 1955 classic Chevy. Made in the USA. MSRP: Now: $22.43 Add to Cart Compare Quick view sku: DAN350 1955 Chevy Clutch Pivot Stud When replacing your clutch components don't forget to replace this vital part. Danchuk # 350 clutch pivot stud will work on any 1955 classic Chevy. Made in the USA. Two required per car. MSRP: Now: $20.13 Add to Cart Compare Quick view sku: DAN348 1955-1956 Chevy Clutch Pedal Return Spring and Hanger Set (Best) This clutch pedal return spring kit is made with high-quality spring steel, manufactured to duplicate angles and dimensions of the original part. Danchuk # 348 will work on any 1955-1956 classic Chevy with a manual transmission. Made in the... MSRP: Now: $37.84 Add to Cart Compare Quick view sku: DAN320 1955-1957 Chevy Brake / Clutch Pedal Pad This brake/clutch pedal pad is made with the same attention to detail as the original. Grooved for traction and injection molded in long-lasting rubber. Danchuk # 320 will work on any 1955-1957 classic Chevy with standard brakes and... MSRP: Now: $10.64 Add to Cart Compare Quick view sku: DAN818 1955-1957 Chevy Brake Or Clutch Pedal Bumper This is a reproduction of the original for 1955 and 1956 models; its an excellent functional replacement for the 1957. Don't worry about being detected, bumper is hidden from view and will not be noticed. Danchuk # 818 will work on any 1955-1957... MSRP: Now: $5.87 Add to Cart Compare Quick view sku: DAN345 1955-1957 Chevy Clutch Cross Shaft Bushing Kit Everything about our clutch cross shaft bushing is custom. The bolt is turned from raw stock, case-hardened and plated with black oxide to protect it from rust. We've specified a bright plated, corrosion-resistant lock nut that features a nylon insert to... MSRP: Now: $20.13 Add to Cart Compare Quick view sku: DAN891 1955-1957 Chevy Clutch Cross Shaft Felt Washer These are the washers that install at either end of the clutch cross shaft where the shaft meets the mounting tabs. They are designed to keep the lubricating grease for the ball ends clean and inside the shaft where it belongs. Danchuk # 891... MSRP: Now: $3.51 Add to Cart Compare Quick view sku: DAN342 1955-1957 Chevy Clutch Fork, also 1955-1962 CorVette We still run these clutch forks off the original GM Class-A tooling using American steel. You never have to worry about fit or functionality with this Danchuk exclusive quality part. Danchuk # 342 will work on any... MSRP: Now: $88.78 Add to Cart Compare Quick view sku: DAN352 1955-1957 Chevy Clutch Pedal Shaft Bushing The clutch pedal shaft bushing, if worn, will cause your clutch pedal to rock on the shaft and not work properly. Danchuk # 352 will work on any 1955-1957 classic Chevy with a standard transmission. Two bushings per car needed. MSRP: Now: $4.66 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view Details sku: DAN342 1955-1957 Chevy Clutch Fork, also 1955-1962 CorVette MSRP: Now: $88.78 Add to Cart Compare Quick view Details sku: DAN352 1955-1957 Chevy Clutch Pedal Shaft Bushing MSRP: Now: $4.66 Add to Cart Compare Quick view sku: DAN12035 1955 -1957 Chevy Shift Linkage Bell Crank Bushing These bell crank bushings install at the mounting/pivot point of the shift linkage bell crank to assure smooth operation. # 12035 will work on any 1955-1957 classic Chevy using a stock shift linkage. Sold as each, 2 required per car. MSRP: Now: $2.50 Add to Cart Compare Quick view sku: DAN340 1955 Chevy Clutch Bell Housing Bracket with Pivot Stud This is the bracket that mounts to the bellhousing which supports the clutch cross shaft or "Z" Bar. Includes the pivot stud. Danchuk # 340 will work on any 1955 classic Chevy. Made in the USA. Note: The 1955 265 V-8 engine... MSRP: Now: $31.91 Add to Cart Compare Quick view sku: DAN1050 1955 Chevy Clutch Cross Shaft Over time the area on the clutch shaft or "Z" bar where it mounts at the pivot studs will wear and allow play. You will notice a marked improvement in clutch movement after replacing your original with one of these perfect reproductions. ... MSRP: Now: $40.95 Add to Cart Compare Quick view sku: DAN346 1955 Chevy Clutch Frame Bracket with Pivot Stud This clutch frame bracket with the pivot stud is made to the exact tolerances of the original for perfect fit and function. Danchuk # 346 will work on any 1955 classic Chevy. Made in the USA. MSRP: Now: $22.43 Add to Cart Compare Quick view sku: DAN350 1955 Chevy Clutch Pivot Stud When replacing your clutch components don't forget to replace this vital part. Danchuk # 350 clutch pivot stud will work on any 1955 classic Chevy. Made in the USA. Two required per car. MSRP: Now: $20.13 Add to Cart Compare Quick view sku: DAN348 1955-1956 Chevy Clutch Pedal Return Spring and Hanger Set (Best) This clutch pedal return spring kit is made with high-quality spring steel, manufactured to duplicate angles and dimensions of the original part. Danchuk # 348 will work on any 1955-1956 classic Chevy with a manual transmission. Made in the... MSRP: Now: $37.84 Add to Cart Compare Quick view sku: DAN320 1955-1957 Chevy Brake / Clutch Pedal Pad This brake/clutch pedal pad is made with the same attention to detail as the original. Grooved for traction and injection molded in long-lasting rubber. Danchuk # 320 will work on any 1955-1957 classic Chevy with standard brakes and... MSRP: Now: $10.64 Add to Cart Compare Quick view sku: DAN818 1955-1957 Chevy Brake Or Clutch Pedal Bumper This is a reproduction of the original for 1955 and 1956 models; its an excellent functional replacement for the 1957. Don't worry about being detected, bumper is hidden from view and will not be noticed. Danchuk # 818 will work on any 1955-1957... MSRP: Now: $5.87 Add to Cart Compare Quick view sku: DAN345 1955-1957 Chevy Clutch Cross Shaft Bushing Kit Everything about our clutch cross shaft bushing is custom. The bolt is turned from raw stock, case-hardened and plated with black oxide to protect it from rust. We've specified a bright plated, corrosion-resistant lock nut that features a nylon insert to... MSRP: Now: $20.13 Add to Cart Compare Quick view sku: DAN891 1955-1957 Chevy Clutch Cross Shaft Felt Washer These are the washers that install at either end of the clutch cross shaft where the shaft meets the mounting tabs. They are designed to keep the lubricating grease for the ball ends clean and inside the shaft where it belongs. Danchuk # 891... MSRP: Now: $3.51 Add to Cart Compare Quick view sku: DAN342 1955-1957 Chevy Clutch Fork, also 1955-1962 CorVette We still run these clutch forks off the original GM Class-A tooling using American steel. You never have to worry about fit or functionality with this Danchuk exclusive quality part. Danchuk # 342 will work on any... MSRP: Now: $88.78 Add to Cart Compare Quick view sku: DAN352 1955-1957 Chevy Clutch Pedal Shaft Bushing The clutch pedal shaft bushing, if worn, will cause your clutch pedal to rock on the shaft and not work properly. Danchuk # 352 will work on any 1955-1957 classic Chevy with a standard transmission. Two bushings per car needed. MSRP: Now: $4.66 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view Details sku: DAN352 1955-1957 Chevy Clutch Pedal Shaft Bushing MSRP: Now: $4.66 Add to Cart Compare Quick view sku: DAN12035 1955 -1957 Chevy Shift Linkage Bell Crank Bushing These bell crank bushings install at the mounting/pivot point of the shift linkage bell crank to assure smooth operation. # 12035 will work on any 1955-1957 classic Chevy using a stock shift linkage. Sold as each, 2 required per car. MSRP: Now: $2.50 Add to Cart Compare Quick view sku: DAN340 1955 Chevy Clutch Bell Housing Bracket with Pivot Stud This is the bracket that mounts to the bellhousing which supports the clutch cross shaft or "Z" Bar. Includes the pivot stud. Danchuk # 340 will work on any 1955 classic Chevy. Made in the USA. Note: The 1955 265 V-8 engine... MSRP: Now: $31.91 Add to Cart Compare Quick view sku: DAN1050 1955 Chevy Clutch Cross Shaft Over time the area on the clutch shaft or "Z" bar where it mounts at the pivot studs will wear and allow play. You will notice a marked improvement in clutch movement after replacing your original with one of these perfect reproductions. ... MSRP: Now: $40.95 Add to Cart Compare Quick view sku: DAN346 1955 Chevy Clutch Frame Bracket with Pivot Stud This clutch frame bracket with the pivot stud is made to the exact tolerances of the original for perfect fit and function. Danchuk # 346 will work on any 1955 classic Chevy. Made in the USA. MSRP: Now: $22.43 Add to Cart Compare Quick view sku: DAN350 1955 Chevy Clutch Pivot Stud When replacing your clutch components don't forget to replace this vital part. Danchuk # 350 clutch pivot stud will work on any 1955 classic Chevy. Made in the USA. Two required per car. MSRP: Now: $20.13 Add to Cart Compare Quick view sku: DAN348 1955-1956 Chevy Clutch Pedal Return Spring and Hanger Set (Best) This clutch pedal return spring kit is made with high-quality spring steel, manufactured to duplicate angles and dimensions of the original part. Danchuk # 348 will work on any 1955-1956 classic Chevy with a manual transmission. Made in the... MSRP: Now: $37.84 Add to Cart Compare Quick view sku: DAN320 1955-1957 Chevy Brake / Clutch Pedal Pad This brake/clutch pedal pad is made with the same attention to detail as the original. Grooved for traction and injection molded in long-lasting rubber. Danchuk # 320 will work on any 1955-1957 classic Chevy with standard brakes and... MSRP: Now: $10.64 Add to Cart Compare Quick view sku: DAN818 1955-1957 Chevy Brake Or Clutch Pedal Bumper This is a reproduction of the original for 1955 and 1956 models; its an excellent functional replacement for the 1957. Don't worry about being detected, bumper is hidden from view and will not be noticed. Danchuk # 818 will work on any 1955-1957... MSRP: Now: $5.87 Add to Cart Compare Quick view sku: DAN345 1955-1957 Chevy Clutch Cross Shaft Bushing Kit Everything about our clutch cross shaft bushing is custom. The bolt is turned from raw stock, case-hardened and plated with black oxide to protect it from rust. We've specified a bright plated, corrosion-resistant lock nut that features a nylon insert to... MSRP: Now: $20.13 Add to Cart Compare Quick view sku: DAN891 1955-1957 Chevy Clutch Cross Shaft Felt Washer These are the washers that install at either end of the clutch cross shaft where the shaft meets the mounting tabs. They are designed to keep the lubricating grease for the ball ends clean and inside the shaft where it belongs. Danchuk # 891... MSRP: Now: $3.51 Add to Cart Compare Quick view sku: DAN342 1955-1957 Chevy Clutch Fork, also 1955-1962 CorVette We still run these clutch forks off the original GM Class-A tooling using American steel. You never have to worry about fit or functionality with this Danchuk exclusive quality part. Danchuk # 342 will work on any... MSRP: Now: $88.78 Add to Cart Compare Quick view sku: DAN352 1955-1957 Chevy Clutch Pedal Shaft Bushing The clutch pedal shaft bushing, if worn, will cause your clutch pedal to rock on the shaft and not work properly. Danchuk # 352 will work on any 1955-1957 classic Chevy with a standard transmission. Two bushings per car needed. MSRP: Now: $4.66 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view sku: DAN12035 1955 -1957 Chevy Shift Linkage Bell Crank Bushing These bell crank bushings install at the mounting/pivot point of the shift linkage bell crank to assure smooth operation. # 12035 will work on any 1955-1957 classic Chevy using a stock shift linkage. Sold as each, 2 required per car. MSRP: Now: $2.50 Add to Cart Compare Quick view sku: DAN340 1955 Chevy Clutch Bell Housing Bracket with Pivot Stud This is the bracket that mounts to the bellhousing which supports the clutch cross shaft or "Z" Bar. Includes the pivot stud. Danchuk # 340 will work on any 1955 classic Chevy. Made in the USA. Note: The 1955 265 V-8 engine... MSRP: Now: $31.91 Add to Cart Compare Quick view sku: DAN1050 1955 Chevy Clutch Cross Shaft Over time the area on the clutch shaft or "Z" bar where it mounts at the pivot studs will wear and allow play. You will notice a marked improvement in clutch movement after replacing your original with one of these perfect reproductions. ... MSRP: Now: $40.95 Add to Cart Compare Quick view sku: DAN346 1955 Chevy Clutch Frame Bracket with Pivot Stud This clutch frame bracket with the pivot stud is made to the exact tolerances of the original for perfect fit and function. Danchuk # 346 will work on any 1955 classic Chevy. Made in the USA. MSRP: Now: $22.43 Add to Cart Compare Quick view sku: DAN350 1955 Chevy Clutch Pivot Stud When replacing your clutch components don't forget to replace this vital part. Danchuk # 350 clutch pivot stud will work on any 1955 classic Chevy. Made in the USA. Two required per car. MSRP: Now: $20.13 Add to Cart Compare Quick view sku: DAN348 1955-1956 Chevy Clutch Pedal Return Spring and Hanger Set (Best) This clutch pedal return spring kit is made with high-quality spring steel, manufactured to duplicate angles and dimensions of the original part. Danchuk # 348 will work on any 1955-1956 classic Chevy with a manual transmission. Made in the... MSRP: Now: $37.84 Add to Cart Compare Quick view sku: DAN320 1955-1957 Chevy Brake / Clutch Pedal Pad This brake/clutch pedal pad is made with the same attention to detail as the original. Grooved for traction and injection molded in long-lasting rubber. Danchuk # 320 will work on any 1955-1957 classic Chevy with standard brakes and... MSRP: Now: $10.64 Add to Cart Compare Quick view sku: DAN818 1955-1957 Chevy Brake Or Clutch Pedal Bumper This is a reproduction of the original for 1955 and 1956 models; its an excellent functional replacement for the 1957. Don't worry about being detected, bumper is hidden from view and will not be noticed. Danchuk # 818 will work on any 1955-1957... MSRP: Now: $5.87 Add to Cart Compare Quick view sku: DAN345 1955-1957 Chevy Clutch Cross Shaft Bushing Kit Everything about our clutch cross shaft bushing is custom. The bolt is turned from raw stock, case-hardened and plated with black oxide to protect it from rust. We've specified a bright plated, corrosion-resistant lock nut that features a nylon insert to... MSRP: Now: $20.13 Add to Cart Compare Quick view sku: DAN891 1955-1957 Chevy Clutch Cross Shaft Felt Washer These are the washers that install at either end of the clutch cross shaft where the shaft meets the mounting tabs. They are designed to keep the lubricating grease for the ball ends clean and inside the shaft where it belongs. Danchuk # 891... MSRP: Now: $3.51 Add to Cart Compare Quick view sku: DAN342 1955-1957 Chevy Clutch Fork, also 1955-1962 CorVette We still run these clutch forks off the original GM Class-A tooling using American steel. You never have to worry about fit or functionality with this Danchuk exclusive quality part. Danchuk # 342 will work on any... MSRP: Now: $88.78 Add to Cart Compare Quick view sku: DAN352 1955-1957 Chevy Clutch Pedal Shaft Bushing The clutch pedal shaft bushing, if worn, will cause your clutch pedal to rock on the shaft and not work properly. Danchuk # 352 will work on any 1955-1957 classic Chevy with a standard transmission. Two bushings per car needed. MSRP: Now: $4.66 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view sku: DAN340 1955 Chevy Clutch Bell Housing Bracket with Pivot Stud This is the bracket that mounts to the bellhousing which supports the clutch cross shaft or "Z" Bar. Includes the pivot stud. Danchuk # 340 will work on any 1955 classic Chevy. Made in the USA. Note: The 1955 265 V-8 engine... MSRP: Now: $31.91 Add to Cart Compare Quick view sku: DAN1050 1955 Chevy Clutch Cross Shaft Over time the area on the clutch shaft or "Z" bar where it mounts at the pivot studs will wear and allow play. You will notice a marked improvement in clutch movement after replacing your original with one of these perfect reproductions. ... MSRP: Now: $40.95 Add to Cart Compare Quick view sku: DAN346 1955 Chevy Clutch Frame Bracket with Pivot Stud This clutch frame bracket with the pivot stud is made to the exact tolerances of the original for perfect fit and function. Danchuk # 346 will work on any 1955 classic Chevy. Made in the USA. MSRP: Now: $22.43 Add to Cart Compare Quick view sku: DAN350 1955 Chevy Clutch Pivot Stud When replacing your clutch components don't forget to replace this vital part. Danchuk # 350 clutch pivot stud will work on any 1955 classic Chevy. Made in the USA. Two required per car. MSRP: Now: $20.13 Add to Cart Compare Quick view sku: DAN348 1955-1956 Chevy Clutch Pedal Return Spring and Hanger Set (Best) This clutch pedal return spring kit is made with high-quality spring steel, manufactured to duplicate angles and dimensions of the original part. Danchuk # 348 will work on any 1955-1956 classic Chevy with a manual transmission. Made in the... MSRP: Now: $37.84 Add to Cart Compare Quick view sku: DAN320 1955-1957 Chevy Brake / Clutch Pedal Pad This brake/clutch pedal pad is made with the same attention to detail as the original. Grooved for traction and injection molded in long-lasting rubber. Danchuk # 320 will work on any 1955-1957 classic Chevy with standard brakes and... MSRP: Now: $10.64 Add to Cart Compare Quick view sku: DAN818 1955-1957 Chevy Brake Or Clutch Pedal Bumper This is a reproduction of the original for 1955 and 1956 models; its an excellent functional replacement for the 1957. Don't worry about being detected, bumper is hidden from view and will not be noticed. Danchuk # 818 will work on any 1955-1957... MSRP: Now: $5.87 Add to Cart Compare Quick view sku: DAN345 1955-1957 Chevy Clutch Cross Shaft Bushing Kit Everything about our clutch cross shaft bushing is custom. The bolt is turned from raw stock, case-hardened and plated with black oxide to protect it from rust. We've specified a bright plated, corrosion-resistant lock nut that features a nylon insert to... MSRP: Now: $20.13 Add to Cart Compare Quick view sku: DAN891 1955-1957 Chevy Clutch Cross Shaft Felt Washer These are the washers that install at either end of the clutch cross shaft where the shaft meets the mounting tabs. They are designed to keep the lubricating grease for the ball ends clean and inside the shaft where it belongs. Danchuk # 891... MSRP: Now: $3.51 Add to Cart Compare Quick view sku: DAN342 1955-1957 Chevy Clutch Fork, also 1955-1962 CorVette We still run these clutch forks off the original GM Class-A tooling using American steel. You never have to worry about fit or functionality with this Danchuk exclusive quality part. Danchuk # 342 will work on any... MSRP: Now: $88.78 Add to Cart Compare Quick view sku: DAN352 1955-1957 Chevy Clutch Pedal Shaft Bushing The clutch pedal shaft bushing, if worn, will cause your clutch pedal to rock on the shaft and not work properly. Danchuk # 352 will work on any 1955-1957 classic Chevy with a standard transmission. Two bushings per car needed. MSRP: Now: $4.66 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view sku: DAN1050 1955 Chevy Clutch Cross Shaft Over time the area on the clutch shaft or "Z" bar where it mounts at the pivot studs will wear and allow play. You will notice a marked improvement in clutch movement after replacing your original with one of these perfect reproductions. ... MSRP: Now: $40.95 Add to Cart Compare Quick view sku: DAN346 1955 Chevy Clutch Frame Bracket with Pivot Stud This clutch frame bracket with the pivot stud is made to the exact tolerances of the original for perfect fit and function. Danchuk # 346 will work on any 1955 classic Chevy. Made in the USA. MSRP: Now: $22.43 Add to Cart Compare Quick view sku: DAN350 1955 Chevy Clutch Pivot Stud When replacing your clutch components don't forget to replace this vital part. Danchuk # 350 clutch pivot stud will work on any 1955 classic Chevy. Made in the USA. Two required per car. MSRP: Now: $20.13 Add to Cart Compare Quick view sku: DAN348 1955-1956 Chevy Clutch Pedal Return Spring and Hanger Set (Best) This clutch pedal return spring kit is made with high-quality spring steel, manufactured to duplicate angles and dimensions of the original part. Danchuk # 348 will work on any 1955-1956 classic Chevy with a manual transmission. Made in the... MSRP: Now: $37.84 Add to Cart Compare Quick view sku: DAN320 1955-1957 Chevy Brake / Clutch Pedal Pad This brake/clutch pedal pad is made with the same attention to detail as the original. Grooved for traction and injection molded in long-lasting rubber. Danchuk # 320 will work on any 1955-1957 classic Chevy with standard brakes and... MSRP: Now: $10.64 Add to Cart Compare Quick view sku: DAN818 1955-1957 Chevy Brake Or Clutch Pedal Bumper This is a reproduction of the original for 1955 and 1956 models; its an excellent functional replacement for the 1957. Don't worry about being detected, bumper is hidden from view and will not be noticed. Danchuk # 818 will work on any 1955-1957... MSRP: Now: $5.87 Add to Cart Compare Quick view sku: DAN345 1955-1957 Chevy Clutch Cross Shaft Bushing Kit Everything about our clutch cross shaft bushing is custom. The bolt is turned from raw stock, case-hardened and plated with black oxide to protect it from rust. We've specified a bright plated, corrosion-resistant lock nut that features a nylon insert to... MSRP: Now: $20.13 Add to Cart Compare Quick view sku: DAN891 1955-1957 Chevy Clutch Cross Shaft Felt Washer These are the washers that install at either end of the clutch cross shaft where the shaft meets the mounting tabs. They are designed to keep the lubricating grease for the ball ends clean and inside the shaft where it belongs. Danchuk # 891... MSRP: Now: $3.51 Add to Cart Compare Quick view sku: DAN342 1955-1957 Chevy Clutch Fork, also 1955-1962 CorVette We still run these clutch forks off the original GM Class-A tooling using American steel. You never have to worry about fit or functionality with this Danchuk exclusive quality part. Danchuk # 342 will work on any... MSRP: Now: $88.78 Add to Cart Compare Quick view sku: DAN352 1955-1957 Chevy Clutch Pedal Shaft Bushing The clutch pedal shaft bushing, if worn, will cause your clutch pedal to rock on the shaft and not work properly. Danchuk # 352 will work on any 1955-1957 classic Chevy with a standard transmission. Two bushings per car needed. MSRP: Now: $4.66 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view sku: DAN346 1955 Chevy Clutch Frame Bracket with Pivot Stud This clutch frame bracket with the pivot stud is made to the exact tolerances of the original for perfect fit and function. Danchuk # 346 will work on any 1955 classic Chevy. Made in the USA. MSRP: Now: $22.43 Add to Cart Compare Quick view sku: DAN350 1955 Chevy Clutch Pivot Stud When replacing your clutch components don't forget to replace this vital part. Danchuk # 350 clutch pivot stud will work on any 1955 classic Chevy. Made in the USA. Two required per car. MSRP: Now: $20.13 Add to Cart Compare Quick view sku: DAN348 1955-1956 Chevy Clutch Pedal Return Spring and Hanger Set (Best) This clutch pedal return spring kit is made with high-quality spring steel, manufactured to duplicate angles and dimensions of the original part. Danchuk # 348 will work on any 1955-1956 classic Chevy with a manual transmission. Made in the... MSRP: Now: $37.84 Add to Cart Compare Quick view sku: DAN320 1955-1957 Chevy Brake / Clutch Pedal Pad This brake/clutch pedal pad is made with the same attention to detail as the original. Grooved for traction and injection molded in long-lasting rubber. Danchuk # 320 will work on any 1955-1957 classic Chevy with standard brakes and... MSRP: Now: $10.64 Add to Cart Compare Quick view sku: DAN818 1955-1957 Chevy Brake Or Clutch Pedal Bumper This is a reproduction of the original for 1955 and 1956 models; its an excellent functional replacement for the 1957. Don't worry about being detected, bumper is hidden from view and will not be noticed. Danchuk # 818 will work on any 1955-1957... MSRP: Now: $5.87 Add to Cart Compare Quick view sku: DAN345 1955-1957 Chevy Clutch Cross Shaft Bushing Kit Everything about our clutch cross shaft bushing is custom. The bolt is turned from raw stock, case-hardened and plated with black oxide to protect it from rust. We've specified a bright plated, corrosion-resistant lock nut that features a nylon insert to... MSRP: Now: $20.13 Add to Cart Compare Quick view sku: DAN891 1955-1957 Chevy Clutch Cross Shaft Felt Washer These are the washers that install at either end of the clutch cross shaft where the shaft meets the mounting tabs. They are designed to keep the lubricating grease for the ball ends clean and inside the shaft where it belongs. Danchuk # 891... MSRP: Now: $3.51 Add to Cart Compare Quick view sku: DAN342 1955-1957 Chevy Clutch Fork, also 1955-1962 CorVette We still run these clutch forks off the original GM Class-A tooling using American steel. You never have to worry about fit or functionality with this Danchuk exclusive quality part. Danchuk # 342 will work on any... MSRP: Now: $88.78 Add to Cart Compare Quick view sku: DAN352 1955-1957 Chevy Clutch Pedal Shaft Bushing The clutch pedal shaft bushing, if worn, will cause your clutch pedal to rock on the shaft and not work properly. Danchuk # 352 will work on any 1955-1957 classic Chevy with a standard transmission. Two bushings per car needed. MSRP: Now: $4.66 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view sku: DAN350 1955 Chevy Clutch Pivot Stud When replacing your clutch components don't forget to replace this vital part. Danchuk # 350 clutch pivot stud will work on any 1955 classic Chevy. Made in the USA. Two required per car. MSRP: Now: $20.13 Add to Cart Compare Quick view sku: DAN348 1955-1956 Chevy Clutch Pedal Return Spring and Hanger Set (Best) This clutch pedal return spring kit is made with high-quality spring steel, manufactured to duplicate angles and dimensions of the original part. Danchuk # 348 will work on any 1955-1956 classic Chevy with a manual transmission. Made in the... MSRP: Now: $37.84 Add to Cart Compare Quick view sku: DAN320 1955-1957 Chevy Brake / Clutch Pedal Pad This brake/clutch pedal pad is made with the same attention to detail as the original. Grooved for traction and injection molded in long-lasting rubber. Danchuk # 320 will work on any 1955-1957 classic Chevy with standard brakes and... MSRP: Now: $10.64 Add to Cart Compare Quick view sku: DAN818 1955-1957 Chevy Brake Or Clutch Pedal Bumper This is a reproduction of the original for 1955 and 1956 models; its an excellent functional replacement for the 1957. Don't worry about being detected, bumper is hidden from view and will not be noticed. Danchuk # 818 will work on any 1955-1957... MSRP: Now: $5.87 Add to Cart Compare Quick view sku: DAN345 1955-1957 Chevy Clutch Cross Shaft Bushing Kit Everything about our clutch cross shaft bushing is custom. The bolt is turned from raw stock, case-hardened and plated with black oxide to protect it from rust. We've specified a bright plated, corrosion-resistant lock nut that features a nylon insert to... MSRP: Now: $20.13 Add to Cart Compare Quick view sku: DAN891 1955-1957 Chevy Clutch Cross Shaft Felt Washer These are the washers that install at either end of the clutch cross shaft where the shaft meets the mounting tabs. They are designed to keep the lubricating grease for the ball ends clean and inside the shaft where it belongs. Danchuk # 891... MSRP: Now: $3.51 Add to Cart Compare Quick view sku: DAN342 1955-1957 Chevy Clutch Fork, also 1955-1962 CorVette We still run these clutch forks off the original GM Class-A tooling using American steel. You never have to worry about fit or functionality with this Danchuk exclusive quality part. Danchuk # 342 will work on any... MSRP: Now: $88.78 Add to Cart Compare Quick view sku: DAN352 1955-1957 Chevy Clutch Pedal Shaft Bushing The clutch pedal shaft bushing, if worn, will cause your clutch pedal to rock on the shaft and not work properly. Danchuk # 352 will work on any 1955-1957 classic Chevy with a standard transmission. Two bushings per car needed. MSRP: Now: $4.66 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view sku: DAN348 1955-1956 Chevy Clutch Pedal Return Spring and Hanger Set (Best) This clutch pedal return spring kit is made with high-quality spring steel, manufactured to duplicate angles and dimensions of the original part. Danchuk # 348 will work on any 1955-1956 classic Chevy with a manual transmission. Made in the... MSRP: Now: $37.84 Add to Cart Compare Quick view sku: DAN320 1955-1957 Chevy Brake / Clutch Pedal Pad This brake/clutch pedal pad is made with the same attention to detail as the original. Grooved for traction and injection molded in long-lasting rubber. Danchuk # 320 will work on any 1955-1957 classic Chevy with standard brakes and... MSRP: Now: $10.64 Add to Cart Compare Quick view sku: DAN818 1955-1957 Chevy Brake Or Clutch Pedal Bumper This is a reproduction of the original for 1955 and 1956 models; its an excellent functional replacement for the 1957. Don't worry about being detected, bumper is hidden from view and will not be noticed. Danchuk # 818 will work on any 1955-1957... MSRP: Now: $5.87 Add to Cart Compare Quick view sku: DAN345 1955-1957 Chevy Clutch Cross Shaft Bushing Kit Everything about our clutch cross shaft bushing is custom. The bolt is turned from raw stock, case-hardened and plated with black oxide to protect it from rust. We've specified a bright plated, corrosion-resistant lock nut that features a nylon insert to... MSRP: Now: $20.13 Add to Cart Compare Quick view sku: DAN891 1955-1957 Chevy Clutch Cross Shaft Felt Washer These are the washers that install at either end of the clutch cross shaft where the shaft meets the mounting tabs. They are designed to keep the lubricating grease for the ball ends clean and inside the shaft where it belongs. Danchuk # 891... MSRP: Now: $3.51 Add to Cart Compare Quick view sku: DAN342 1955-1957 Chevy Clutch Fork, also 1955-1962 CorVette We still run these clutch forks off the original GM Class-A tooling using American steel. You never have to worry about fit or functionality with this Danchuk exclusive quality part. Danchuk # 342 will work on any... MSRP: Now: $88.78 Add to Cart Compare Quick view sku: DAN352 1955-1957 Chevy Clutch Pedal Shaft Bushing The clutch pedal shaft bushing, if worn, will cause your clutch pedal to rock on the shaft and not work properly. Danchuk # 352 will work on any 1955-1957 classic Chevy with a standard transmission. Two bushings per car needed. MSRP: Now: $4.66 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view sku: DAN320 1955-1957 Chevy Brake / Clutch Pedal Pad This brake/clutch pedal pad is made with the same attention to detail as the original. Grooved for traction and injection molded in long-lasting rubber. Danchuk # 320 will work on any 1955-1957 classic Chevy with standard brakes and... MSRP: Now: $10.64 Add to Cart Compare Quick view sku: DAN818 1955-1957 Chevy Brake Or Clutch Pedal Bumper This is a reproduction of the original for 1955 and 1956 models; its an excellent functional replacement for the 1957. Don't worry about being detected, bumper is hidden from view and will not be noticed. Danchuk # 818 will work on any 1955-1957... MSRP: Now: $5.87 Add to Cart Compare Quick view sku: DAN345 1955-1957 Chevy Clutch Cross Shaft Bushing Kit Everything about our clutch cross shaft bushing is custom. The bolt is turned from raw stock, case-hardened and plated with black oxide to protect it from rust. We've specified a bright plated, corrosion-resistant lock nut that features a nylon insert to... MSRP: Now: $20.13 Add to Cart Compare Quick view sku: DAN891 1955-1957 Chevy Clutch Cross Shaft Felt Washer These are the washers that install at either end of the clutch cross shaft where the shaft meets the mounting tabs. They are designed to keep the lubricating grease for the ball ends clean and inside the shaft where it belongs. Danchuk # 891... MSRP: Now: $3.51 Add to Cart Compare Quick view sku: DAN342 1955-1957 Chevy Clutch Fork, also 1955-1962 CorVette We still run these clutch forks off the original GM Class-A tooling using American steel. You never have to worry about fit or functionality with this Danchuk exclusive quality part. Danchuk # 342 will work on any... MSRP: Now: $88.78 Add to Cart Compare Quick view sku: DAN352 1955-1957 Chevy Clutch Pedal Shaft Bushing The clutch pedal shaft bushing, if worn, will cause your clutch pedal to rock on the shaft and not work properly. Danchuk # 352 will work on any 1955-1957 classic Chevy with a standard transmission. Two bushings per car needed. MSRP: Now: $4.66 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view sku: DAN818 1955-1957 Chevy Brake Or Clutch Pedal Bumper This is a reproduction of the original for 1955 and 1956 models; its an excellent functional replacement for the 1957. Don't worry about being detected, bumper is hidden from view and will not be noticed. Danchuk # 818 will work on any 1955-1957... MSRP: Now: $5.87 Add to Cart Compare Quick view sku: DAN345 1955-1957 Chevy Clutch Cross Shaft Bushing Kit Everything about our clutch cross shaft bushing is custom. The bolt is turned from raw stock, case-hardened and plated with black oxide to protect it from rust. We've specified a bright plated, corrosion-resistant lock nut that features a nylon insert to... MSRP: Now: $20.13 Add to Cart Compare Quick view sku: DAN891 1955-1957 Chevy Clutch Cross Shaft Felt Washer These are the washers that install at either end of the clutch cross shaft where the shaft meets the mounting tabs. They are designed to keep the lubricating grease for the ball ends clean and inside the shaft where it belongs. Danchuk # 891... MSRP: Now: $3.51 Add to Cart Compare Quick view sku: DAN342 1955-1957 Chevy Clutch Fork, also 1955-1962 CorVette We still run these clutch forks off the original GM Class-A tooling using American steel. You never have to worry about fit or functionality with this Danchuk exclusive quality part. Danchuk # 342 will work on any... MSRP: Now: $88.78 Add to Cart Compare Quick view sku: DAN352 1955-1957 Chevy Clutch Pedal Shaft Bushing The clutch pedal shaft bushing, if worn, will cause your clutch pedal to rock on the shaft and not work properly. Danchuk # 352 will work on any 1955-1957 classic Chevy with a standard transmission. Two bushings per car needed. MSRP: Now: $4.66 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view sku: DAN345 1955-1957 Chevy Clutch Cross Shaft Bushing Kit Everything about our clutch cross shaft bushing is custom. The bolt is turned from raw stock, case-hardened and plated with black oxide to protect it from rust. We've specified a bright plated, corrosion-resistant lock nut that features a nylon insert to... MSRP: Now: $20.13 Add to Cart Compare Quick view sku: DAN891 1955-1957 Chevy Clutch Cross Shaft Felt Washer These are the washers that install at either end of the clutch cross shaft where the shaft meets the mounting tabs. They are designed to keep the lubricating grease for the ball ends clean and inside the shaft where it belongs. Danchuk # 891... MSRP: Now: $3.51 Add to Cart Compare Quick view sku: DAN342 1955-1957 Chevy Clutch Fork, also 1955-1962 CorVette We still run these clutch forks off the original GM Class-A tooling using American steel. You never have to worry about fit or functionality with this Danchuk exclusive quality part. Danchuk # 342 will work on any... MSRP: Now: $88.78 Add to Cart Compare Quick view sku: DAN352 1955-1957 Chevy Clutch Pedal Shaft Bushing The clutch pedal shaft bushing, if worn, will cause your clutch pedal to rock on the shaft and not work properly. Danchuk # 352 will work on any 1955-1957 classic Chevy with a standard transmission. Two bushings per car needed. MSRP: Now: $4.66 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view sku: DAN891 1955-1957 Chevy Clutch Cross Shaft Felt Washer These are the washers that install at either end of the clutch cross shaft where the shaft meets the mounting tabs. They are designed to keep the lubricating grease for the ball ends clean and inside the shaft where it belongs. Danchuk # 891... MSRP: Now: $3.51 Add to Cart Compare Quick view sku: DAN342 1955-1957 Chevy Clutch Fork, also 1955-1962 CorVette We still run these clutch forks off the original GM Class-A tooling using American steel. You never have to worry about fit or functionality with this Danchuk exclusive quality part. Danchuk # 342 will work on any... MSRP: Now: $88.78 Add to Cart Compare Quick view sku: DAN352 1955-1957 Chevy Clutch Pedal Shaft Bushing The clutch pedal shaft bushing, if worn, will cause your clutch pedal to rock on the shaft and not work properly. Danchuk # 352 will work on any 1955-1957 classic Chevy with a standard transmission. Two bushings per car needed. MSRP: Now: $4.66 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view sku: DAN342 1955-1957 Chevy Clutch Fork, also 1955-1962 CorVette We still run these clutch forks off the original GM Class-A tooling using American steel. You never have to worry about fit or functionality with this Danchuk exclusive quality part. Danchuk # 342 will work on any... MSRP: Now: $88.78 Add to Cart Compare Quick view sku: DAN352 1955-1957 Chevy Clutch Pedal Shaft Bushing The clutch pedal shaft bushing, if worn, will cause your clutch pedal to rock on the shaft and not work properly. Danchuk # 352 will work on any 1955-1957 classic Chevy with a standard transmission. Two bushings per car needed. MSRP: Now: $4.66 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected
Quick view sku: DAN352 1955-1957 Chevy Clutch Pedal Shaft Bushing The clutch pedal shaft bushing, if worn, will cause your clutch pedal to rock on the shaft and not work properly. Danchuk # 352 will work on any 1955-1957 classic Chevy with a standard transmission. Two bushings per car needed. MSRP: Now: $4.66 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected